Davenport, IA
Spray Foam Insulation in Davenport, IA
Closed-cell and open-cell spray foam — air seal and insulation in one pass.
Why Davenport homes need spray foam
Davenport homeowners get the biggest spray foam ROI we see in the QC — partly because the older housing stock has so much air leakage to fix, and partly because Davenport's hilltop neighborhoods catch hard winter wind. Local contractors have foamed attics in McClellan Heights, rim joists in Hilltop bungalows, and full crawl spaces in Village of East Davenport carriage houses.
Spray foam is the only insulation product that air-seals AND insulates in a single application. Closed-cell foam delivers R-6.5 to R-7 per inch and stops bulk water; open-cell foam delivers around R-3.7 per inch at lower cost and is ideal for interior walls and attic roof decks. Either way, you eliminate the air leaks fiberglass batts can never address.
We spray attics, walls (during remodels), rim joists, crawl spaces, pole barns, and commercial buildings. Every job starts with a free in-person walk-through, a written line-itemed quote, and full prep — masking, plastic, and respirator-rated PPE for the crew.
Neighborhoods we serve in Davenport
Duck Creek corridor (1950s–70s housing stock, underinsulated attics common), Hamburg neighborhood (older brick homes, rim joist sealing high ROI), Fejervary area (mid-century ranches), East Village and riverfront (moisture-exposed, older buildings), Elmore Avenue corridor (mix of ages, many vented crawl spaces), and NorthPark/Brady Street area (dense residential, attic spray foam common).
What's included
- • Site protection: floors, HVAC returns, and adjacent rooms masked off
- • Substrate prep: moisture check, debris removal, primer where required
- • Open- or closed-cell foam applied to spec thickness with depth gauges
- • Trim and clean: foam shaved flush, overspray cleaned up, site swept
- • Final walk-through with photos and a written warranty
Other services available in Davenport
Spray Foam Insulation FAQ
What does spray foam cost?+
Most projects land between $1.50 and $4.00 per board foot installed, depending on open-cell vs closed-cell and access. Typical attic jobs run $2,500–$6,500. Your contractor will give a written quote after a free in-home walk-through — never high-pressure phone estimates.
Open-cell or closed-cell — which do I need?+
Closed-cell for anywhere moisture or contact with concrete is a concern (crawl spaces, rim joists, basement walls, exterior applications). Open-cell for interior walls and most attic roof decks where you want sound dampening and a lower price per inch. Your contractor will recommend the right product on the walk-through.
Is spray foam safe once it's cured?+
Yes. Once spray foam has fully cured (typically 24 hours), it's inert and safe to re-enter. Your contractor will use only modern HFO-blown formulations with no ozone-depleting blowing agents. We also keep the home unoccupied during install and for 24 hours after.
How long does spray foam last?+
Properly installed spray foam is permanent — it doesn't sag, settle, or lose R-value over time the way fiberglass and cellulose do. We back our installs with a written warranty.
Quad Cities service area
spray foam is also available in nearby Quad Cities communities:
See our full spray foam insulation contractors hub for the complete service area.
Ready to stop wasting money on heating bills?
Get a free, no-pressure spray foam estimate from a local Bettendorf crew.